2-2 2002 Buell P3: Chassis
HOME
TORQUE VALUES
ITEM TORQUE NOTES
Brake bleeder valve 3-5 ft-lbs 4-7 Nm Metric, Page 2-19
Clutch lever screw 50-60
in-lbs
6-7 Nm Page 2-63
Footpeg support mounting bracket bolts 25-30 ft-lbs 34-41 Nm Page 2-53
Frame-to-isolator rear fastener 30-33 ft-lbs 41-45 Nm
Apply several drops of LOCTITE®
thread locker 272 (red) to last few
threads, Page 2-65
Front and rear brake rotor screws,
TORX
24-27 ft-lbs 33-37 Nm
Tighten in criss-cross pattern. Apply sev-
eral drops of LOCTITE® thread locker
272 (red) to last few threads, Page 2-11
Front axle nut 38-42 ft-lbs 52-57 Nm
Apply several drops of LOCTITE®
thread locker 243 (blue) to last few
threads. Metric, Page 2-9
Front axle pinch screw 13-16 ft-lbs 18-22 Nm Metric, Page 2-9
Front brake caliper mounting bolts 18-22 ft-bs 24-30 Nm
Apply several drops of LOCTITE®
thread locker 272 (red) to last few
threads, Page 2-25
Front brake caliper pad hanger pin 11-15 ft-lbs 15-20 Nm Metric, Page 2-25
Front brake hand lever nut 44-62
in-lbs
5-7 Nm Metric, Page 2-21
Front brake hand lever pivot bolt 4-13
in-lbs
0.5-1.5 Nm LOCTITE ANTI-SEIZE, Page 2-21
Front brake line clamp screw 3-5 ft-lbs 4-7 Nm Page 2-26
Front brake switch screw 7-13
in-lbs
0.8-1.5 Nm Page 2-21
Front fender mounting screws 27-30
in-lbs
3.1-3.4 Nm Page 2-55
Front isolator mount bolt See NOTES See NOTES
Torque to 20 ft-lbs (27.1 Nm), turn bolt
clockwise an additional 63°-67°, Page 2-
64
Front muffler bolts 22-25 ft lbs 30-34 Nm Page 2-52
Front sprocket cover bolts 30-36
in-lbs
3-4 Nm Page 2-54
Front tie bar bolt 30-33 ft-lbs 41-45 Nm Page 2-64
Handlebar clamp fasteners 10-12 ft-lbs 14-16 Nm Page 2-63
Handlebar left and right housing screws 25-33
in-lbs
3-4 Nm Page 2-63
Instrument panel screws 30-36
in-lbs
3-4 Nm
Apply several drops of LOCTITE®
thread locker 243 (blue) to last few
threads, metric, Page 2-60
Lower and upper header nuts 6-8 ft-lbs 8-11 Nm Lower first, Page 2-52
Lower belt guard 30-36
in-lbs
3-4 Nm Page 2-56
Master cylinder cover screws 9-13
in-lbs
1.0-1.5 Nm Page 2-25
Outboard isolator bolts 30-33 ft-lbs 41-45 Nm Page 2-64
Rear axle nut 48-52 ft-lbs 65-71 Nm Page 2-50
Rear brake caliper mounting screw,
large
18-22 ft-lbs 24-30 Nm Metric, Page 2-31
Rear brake caliper mounting screw,
small
15-18 ft-lbs 20-24 Nm Metric, Page 2-31
To Next Page
Loading...
