CAB A+ Series User Manual

238
238
238cab Produkttechnik GmbH & Co KG
H - Heat, Speed, Method of Printing, Ribbon
This command sets printing heat, speed and the method of printing for the current label.
Print quality is influenced by the used material and by the print heat and print speed.
H speed[,h][,t][,r][,Bb] CR
H - Heat, speed, method of printing, ribbon
speed = Print speed in millimeters or inches
These values depend on the printer type, please see the
operator´s manual for details. A „wrong“ value will
automatically rounded by the printer to the next possible value.
h = Heat setting (-10 up to +10)
t = Type: T=Transfer, D= Direct thermal (Default: T)
r = Ribbon saver on/off R0=off, R1=on *
b = Back feed speed in millimeters or inches
H 150,0,D,R1
Sets print speed to 150mm/s , Heat setting zero, Direct thermal mode and switches the ribbon saver
on. (The printer must be equipped with a ribbon saver to use this option)
The maximum print speed depends on the used printer model. The print speed is automatically set to
the maximum if accidentially a higher printspeed is transmitted.
* The functionality of the ribbon saver command depends on the used printer model and the availablity
of a ribbon saver.
Example:
Syntax:

CAB A+ Series Specifications

General

Brand	CAB
Model	A+ Series
Category	Label Maker
Language	English