83
83
83cab Produkttechnik GmbH & Co KG
s - set Date/Time
Used to set date and time to be recalled on a label. The printer has an internal real time clock which
keeps date and time. If it is required this command can be used to synchronize the attached device and
the printer.
s n[ss]
CR
s = Set date / time command.
n = ASCII - string in following format to adjust date and time in the
printer of following format: YYMMDDhhmmss
YY = Year - 2 digits
(values between 70 and 99 are interpreted as
1970-1999. Anything else is treated as year2000)
MM = Month. - 2 digits
DD = day - 2 digits
hh = hour - 2 digits
mm = minutes - 2 digits
[ss] = seconds - 2 digits
(setting of ss is optional)
s 081105091500
Sets printer date and time to:
November 24, 2008 9:15 a.m.
Example:
Syntax:
To Next Page
Loading...
