384
384
384cab Produkttechnik GmbH & Co KG
[WUSER... ] Write value to USER memory
Writes the value into the "user memory“. The function is similar to the [WTMP] command, with the
exception that only one user file can be used at the same time, the total amount of characters is less,
but it requires no additional memory card to read or write a value in the printer.
[WUSER]
WUSER - Write into user memory
maximum length is 32 bytes
m m
J
S l1;0,0,68,71,100
T:XVAL;10,10,0,3,3;[RUSER,1][I]
T:SERNO;10,10,0,3,3;[+:XVAL,1][D:0,0][I][WUSER]
T:TESTFLD;10,20,0,3,8;Serial number is: [SERNO]
A3
This sample prints three labels where the counter counts from 1 to 3. The first label is shown below.
See also the command [RUSER] - Read value from user memory.
Example:
Special Functions
Syntax:
To Next Page
Loading...
Need help?
General
