72
72
72cab Produkttechnik GmbH & Co KG
e - erase data
The e command is used to erase data from the printer´s memory (RAM), such as fonts and graphics.
Data on the memory card will not be affected by this sequence. Separate commands are available
for erasing files from the memory card. ( see also the „M“ commandlater in this manual )
e type;name
CR
e - erase data command
type = The file types being removed, with following valid file
extensions:
Images: BMP, GIF, IMG, MAC, PCX, PNG, TIF
Fonts: FNT, TTF.
(FNT can be used for all font types and IMG can be used for
all picture types)
name = The name attached to the font or graphic when it was
sent to the printer. A wildcard ( * ) may be used to
delete all files of the same type. "name" is not case sensitive.
e FNT;*
Erases all true type fonts which are currently in the printer’s memory.
e IMG;logo
Erases the picture with the name "logo" in the printer´s memory
The printer keeps the received graphic fles in its internal memory until it will be switched off or until
these files will be erased or overwritten.
Example:
Example:
Syntax:
To Next Page
Loading...
