CAB A+ Series - A - ASCII Dump Mode

63
63
63cab Produkttechnik GmbH & Co KG
a - ASCII Dump Mode
The a command starts the ASCII dump mode. The ASCII dump mode shows all received data and is a
very important instrument to detect wrong data in the program code.
The printer´s LCD panel shows „ASCII dump mode“ in the selected language.
All received data is printed „transparent“ and the printer doesn´t interpret it.
The ASCII Dump Mode is also selectable through the navigator pad.
Note: After ASCII Dump Mode is selected you must confirm this selection with the ENTER button of the
navigator pad.
a CR
The following data creates a label with one line of text. Please view the picture below which shows the
same label in ASCII Dump mode.
a
m m
J
S l1;0,0,68,70,100
T 25,25,0,3,13;ASCII Dump Mode
A1
f
If „protocol errors“ are shown on the label means, that there is a mistake in the program code!
Syntax: