47
47
47cab Produkttechnik GmbH & Co KG
ESCj Request for the latest printed job
ESCj is used together with the command " j " -described later in this manual. Using this command
responds the name of the latest printed job. Can be used to get information about, if the print job was
finished successfully.
The responded value uses the actual selected codepage and ends with a carriage return.
ESCj
m m
J
S l1;0,0,68,70,100
T 25,25,0,3,13;Beer
A1
ESCj
would generate a generic name if the " j " commmand has not been used and could look
like this:
FTP-20091031-14:38:15
m m
J
S l1;0,0,68,70,100
T 25,25,0,3,13;Beer
j another way to control the printer
A1
ESCj
would respond:
another way to control the printer
Example:
Example:
Syntax:
To Next Page
Loading...
