4-6
To Set the Tempo and Metronome for a New Project…
1. In the Metronome toolbar, select the Metronome during Recording
and Metronome during Playback options.
2. If you want to hear a count-in before recording begins, set the
count-in to 1 or more. Select Count-in Measures or Count-in
Beats .
3. Select Use PC Speaker and/or Use MIDI Metronome .
4. Arm at least one track.
5. Press R or click to start recording. The count-in will play, and
the Now time will start to advance.
6. Adjust the tempo using the tempo controls in the toolbar until the
metronome plays the tempo you want.
7. Press the space bar or click to stop recording.
8. Press W, or click to rewind to the beginning of the piece.
Your tempo and metronome settings are now ready. When you save the
project file, the metronome and tempo settings will be saved as well.
To Change Your Metronome Settings…
1. Open the Metronome Settings dialog box in one of the following
ways:
• Click Metronome Settings in the Metronome toolbar.
• Choose
Options-Project Options
and click the Metronome
tab.
2. Change the metronome settings as indicated in the following
table:
To do this… Do this…
Enable the metronome during
playback
Check Playback
Enable the metronome during
recording
Check Recording
Enable the count-in Enter the number of measures for the
count-in in the Count-in box, and
select Measures or Beats
To Next Page
Loading...