CAKEWALK PRO AUDIO - Shifting Pitch

7-44
Shifting Pitch
The Cakewalk FX Pitch Shifter raises or lowers the pitch of an audio
signal, while leaving the duration of the audio event unchanged. The
pitch shift parameters are as follows:
This is a fast pitch shifter that uses minimal computation time. The
Cakewalk FX Time/Pitch Stretch command, described below, can
produce higher quality output, but requires a lot more computational
time.
Parameter/Option... Meaning...
Pitch The amount by which the pitch is changed, in
semitones
Dry Mix (%) The volume of the original, unprocessed signal passed
to the output
Wet Mix (%) The volume of the processed signal passed to the
output
Feedback Mix (%) The amount of pitch-shifted signal that is fed into a
delay line
Delay Time (ms) The length of the delay in milliseconds
Mod. Depth (ms) The amount the delay time will vary
To Apply Pitch Shift to Audio Data...
1. Select the audio data to be affected.
2. Choose
Audio Effects-Cakewalk FX-Pitch Shifter from the
Edit menu or from the pop-up menu to open the Cakewalk FX
Pitch Shifter dialog box.
3. Set the pitch shift parameters, as described in the table above.
4. Click OK.
Pro Audio applies the pitch shift to the selected data.