H-3
Session Drummer
Load Song from a File
Click to select from a list of previously saved drum tracks. In the
Open dialog, select the drum track you want to open and click OK.
Save Song to a File
Click to save the set of patterns in the Song Þeld. In the Save dialog,
enter a name for the drum track and click OK.
Presets
Once you have made changes in the Settings dialog, you can save them
as a preset for use with future projects. See Saving Your Settings as a
Preset for more information.
The Settings Dialog
Click to open the settings dialog. From here you can select the source
folder for the drum style/patterns. This feature allows you to organize
your patterns into different folders and still have access to them from
within the plug-in. You arenÕt limited to a single folder.
In addition, the settings dialog also includes a drum map. This allows
you to map the General MIDI (GM) patterns to non-GM instruments.
You can only use Standard (type 0) MIDI Þles with Session Drummer.
To Change a Mapping…
1. Click to open the Settings dialog.
2. Select a mapping from the list.
3. Press the '+' key to move the map value up (from B4 to C5, for
example), or press the '-' key to move the map value down (from
C5 to B4, for example).
You can save your changes as a preset for use with future projects.
To Set the Port, Channel and Directory…
1. Open the Settings dialog.
2. Select the Port or Channel from their drop-down lists, or use the
Browse button next to the Content Folder field to set the content
folder.
To Next Page
Loading...