8-29
Notation
You can suppress the display of all pedal marks by deselecting the Show
Pedal Events option in the Staff view's Layout dialog box.
Tablature
The Staff view can display guitar or bass MIDI tracks as tablature. You
can generate and edit tablature or enter notes on either the fretboard or
on the tablature staff to create a new track. You can export tablature to
an ASCII Þle for printing or distribution on the Web.
Tablature Settings
Both the Staff View Layout dialog box and the Tablature Settings dialog
box create tablature settings for a whole track at a time. To modify tabla-
To Add a Pedal Mark...
1. Click the Draw tool .
2. Select the Pedal tool .
3. Position the pointer below the staff (the pointer changes to a
pencil when you are in a legal position).
4. Click to place a pedal mark.
Pro Audio inserts a pair of pedal symbols (a pedal down and a pedal
up). You can click and drag either symbol to a new time.
To Edit a Pedal Event...
1. Right-click the pedal symbol (pedal down or pedal up) to open the
Pedal Event Parameters dialog box.
2. Edit the pedal event parameters, as described in the table above.
3. Click OK.
Pro Audio changes the pedal event parameters, including moving the
symbol to a new time if necessary.
To Next Page
Loading...