H-6
Deleting a Preset
To delete a preset, select the preset from the drop down menu and click
the button (to the right of the disk button).
Using Session Drummer in Real-time
To Write a Song to a Track…
1. Arrange patterns the way you want.
2. Open the Track view.
3. Patch Session Drummer into a track and create a song.
4. Select the track.
5. Open the Console view and click .
A dialog appears asking if you want to remove the plug-in from
the track. If you do not, duplicate notes will play.
6. Make sure the Delete the effects from the track inserts checkbox
is checked and click OK.
The contents have been added to the track. Session Drummer
data always begins one measure into the track regardless of the
Now Time
To Apply Session Drummer as a Real-time Effect…
1. Start a new project.
2. Open the Console view.
3. Right-click in the Aux bus and choose Add MIDI Track.
A new module appears in the Console view.
4. Right-click in the Effects Patch area (the black window directly
below the track name field in Console view) and select
Cakewalk
FX-Session Drummer
.
5. Double-click on the Session Drummer plug-in.
6. Choose a Style and select drum patterns to create a song.
7. Click the Play button on the Transport toolbar.
The drum track repeats, like a drum machine, as long as the play
button is engaged. Open the Session Drummer template from the
New Project dialog to save a few steps (1-4 above).
To Next Page
Loading...