7-20
Scrubbing
You can use the Scrub tool to locate or audition a particular sound or
passage as you drag the mouse. You can scrub a single event, or scrub all
events displayed in the view.
Basic Audio Processing
Audio processing commands let you modify audio data according to some
rule or algorithm. The rule can be as simple as reversing the audio data
or multiplying it by a certain factor, or as complex as performing a
Fourier analysis and selectively amplifying or attenuating sounds at
certain frequencies. Among the basic audio processing commands are
5. Release the mouse button to apply the envelope.
Press Shift when making your initial click, or while dragging, to snap to
the nearest 25% increment. Press Esc while dragging to cancel the
operation. You can click on the track number and drag the mouse up or
down to change the volume of the entire track.
To Audition Audio with the Scrub Tool...
1. Click the Scrub tool .
2. Click and drag the pointer over audio events.
Tip:
If you drag back over the starting time at a different volume level, the
starting volume is changed to the new one.
Tip:
To hear the events in all displayed tracks, drag with the Scrub tool in
the horizontal ruler.
To Next Page
Loading...