2-16
If the song is playing, youÕll immediately hear the change. You can use
this technique to adjust your effects in real time.
To delete the Transpose effect, click on it and press Delete.
That completes the Þrst tutorial. In the next tutorial, youÕll learn to
record MIDI and digital audio tracks into Pro Audio.
Tutorial 2—Recording MIDI and
Digital Audio
This tutorial teaches you how to record with Pro Audio. YouÕll learn how
to:
¥ Set up the metronome
¥ Record MIDI tracks
¥ Use loop recording
¥ Use punch recording
¥ Record digital audio tracks
Rehearsal Time, Part 2
In Tutorial 1, you used Pro Audio to help you rehearse a solo in one of
your bandÕs songs. Pro Audio played the backup parts of the song while
you played your solo. Now that youÕve had some time to practice, youÕd
like to record your solo with Pro Audio so you can play it and hear how
you sound.
Pro Audio lets you record two different types of data: MIDI and digital
audio. If you have a MIDI instrument connected to the MIDI In port of
your sound card or an external MIDI interface, youÕll probably want to
record your performance as MIDI. Otherwise, youÕll need to hook your
instrument, preamp, effects rack, mixer, or microphone to the
appropriate audio input of your sound card and record your performance
as digital audio. For information on how to connect your instrument to
the computer, see ÒInstallation and SetupÓ on page 1-15.
Opening the Project File
If you havenÕt already done so, the Þrst thing you need to do is load the
project Þle containing your bandÕs song.
1. Start Pro Audio.
2. Choose
File-Open
.
To Next Page
Loading...