H-4
Default Settings
The following is a list of the default settings in the Settings dialog:
Port
The default port is 1.
Channel
There is no default channel set.
3. In Session Drummer, enter a name for the new mapping in the
drop-down list.
4. Click the .
Note: If you do not select an output port, the default port is set at 1
To Save as a Preset…
1. Click to open the Settings dialog.
2. Make the changes you want in the Settings dialog and click OK.
3. In Session Drummer, click in the Preset field and enter a name for
the current settings.
4. Click to save the Preset for future use.
To Next Page
Loading...