CAKEWALK PRO AUDIO - Creating Lists

10-8
Creating Lists
You can create and edit the various lists that make up each instrument
deÞnition. Patch name, note name, and controller name lists can contain
up to 128 entries, numbered 0 through 127. RPN and NRPN name lists
can contain up to 16,384 entries, numbered 0 through 16,383.
To Manage Name Lists…
1. To create, edit, or work with name lists, follow the directions in
the table:
To do this… Do this…
Create a new name list Highlight a name list and press the
Ins (Insert) key; highlight the folder
and press Shift-Insert; or right-click
on any folder or name list and choose
Add Names List from the menu. Then
enter the name of the list.
Delete a name list Highlight the names list and press the
Del (Delete) key; or right-click on the
name list and choose Delete from the
menu. You will see a warning if the
list is used by any instrument
definition. If you delete the list
anyway, the instrument definition will
change automatically.
Add the next item in a name
list
Highlight a name and press the Ins
key, or right-click on a name and
choose Add Name from the menu.
Then enter the name.
Add a name anywhere in a list Highlight the name of a list and press
Shift-Insert, or right-click on the
name of a list and choose Add Name
from the menu. Then enter the name.
Delete names from a list Highlight the Names List or Name,
and press Del. You can also right-
click, then choose Delete .
Edit a name in a list Highlight the name or name list and
press F2, or right-click and choose
Edit from the menu. Then enter the
new name.