5-25
Arranging
While the Split command works for both MIDI and audio clips, the Split
tool in the Audio view provides more precise control, which is often
required for audio material. In particular, this other command provides
sample accurate editing and snap-to-zero capability.
Note that the Undo and Redo commands work with all three of these
editing commands.
To Split Clips into Smaller Clips…
1. Select the clips you want to split.
2. Right-click on any selected clip, and choose
Split
from the menu.
Pro Audio shows the Split dialog box.
3. Choose the Split option you want to use, and enter the settings
you want to use.
4. Click OK.
Pro Audio splits the selected clips according to your instructions.
To Combine Clips…
1. Select the clips you want to combine.
2. Right-click on any selected clip, and choose
Combine
from the
menu.
Pro Audio combines the selected clips into a single, new clip. If the
selected clips were on different tracks, the resulting clip is placed in
the first of these tracks.
To Split Material into New, Separate Clips…
1. Select a portion of one or more existing clips.
2. Choose
Edit-Create Clips
, or right-click on any selected clip and
choose
Create Clips
from the menu.
Pro Audio creates new clips from the selected material.
To Next Page
Loading...