6-33
Editing Events
In the second Event Filter dialog box, the checkboxes and value ranges
for beats and ticks are ignored. Only the replacement value ranges for
the selected event types are used.
The Edit-Interpolate command understands a wild card octave
number in the second event Þlter to mean, Òreplace the original note
with a different note in the original octave.Ó Using octave wild cards for
both the search and replacement event Þlters lets you, for instance,
change all E-ßats to E-naturals, preserving the octave of each note.
A few examples will illustrate some of the many uses of the Edit-
Interpolate command. These examples apply to the note event type,
though the command can be used on any type of event.
Parameter... Search range... Replacement
range...
Effect...
Pitch (key) From C2 to C4 From C4 to C6 Transposes all notes
in the search range
up two octaves
Pitch From E2 to E2 From Eb2 to Eb2 Converts all Es in
octave 2 to Eb in the
same octave
Pitch From E? to E? From Eb? to Eb? Converts all Es in all
octaves to Eb in the
same octave
Pitch From E? to E? From Eb5 to Eb5 Converts all Es to Eb
in octave 5
Pitch From C1 to C8 From C8 to C1 Inverts all the notes
in the specified range
Velocity From 0 to 127 From 80 to 127 Compresses the
velocity values into a
narrower range
Velocity From 0 to 127 From 127 to 0 Inverts the velocity
values (makes loud
notes soft, and soft
notes loud)
Duration From 0:01:00 to
0:02:000
From 0:01:000 to
0:01:000
Converts all notes
that are between a
quarter note and half
note in length, and
makes them all
quarter notes
To Next Page
Loading...