8-24
To Add a Guitar Chord Grid…
1. Right-click the chord symbol to open the Chord Properties dialog
box.
2. Follow the instructions in the table:
To do this… Do this…
Display a blank chord grid Click New Grid
Place a dot on the grid Select the finger number (1-4, or T
for Thumb), then click the grid at the
appropriate string and fret location
Assign an open string Select O, then click on the string
Assign a muted string Select X, then click on the string
Change the finger assigned to
a dot
Click the dot repeatedly to cycle
through the fingers
Insert a fret designation Click to the right of the grid and enter
the number of the index finger fret in
the Chord Fret Number dialog box
Play the chord (Audition) Click Play
Remove the chord grid Click Remove Grid
3. Click OK.
The Staff view displays the chord with the new guitar chord grid.
To Manage the Chord Library…
1. Right-click the chord symbol to open the Chord Properties dialog
box.
2. Follow the instructions in the table:
To do this… Do this…
Add a chord to the library Select a group, enter a name in the
Name box, enter a guitar grid (if
desired), and click Save
Delete a chord from the
current group
Select the chord from the list and
click Delete
To Next Page
Loading...