9-6
To Choose the Modules that are Displayed…
1. Click the Module Manager button to open the Module
Manager dialog box.
2. In the module list, check those modules you would like displayed
in the Console view, and uncheck the rest. You can use Shift-
click, Control-click, or the quick select buttons to select multiple
modules; press Space to check or uncheck all the selected
modules at once.
3. Click OK.
To Hide a Module…
1. Right-click on the module and choose
Hide Module
.
To Change the Meter Display…
1. Use the tools in the Console view toolbar as described in the table
that follows:
Tool… How it works…
When pressed, Record level meters
are displayed when a track has an
audio input source and is armed for
recording.
When pressed, Playback level meters
are displayed on all Main outputs.
When pressed, peak indicators are
displayed instead of meters. The peak
indicators light if the signal is
clipping.
To Next Page
Loading...