10-11
Instruments
how to compute the bank numbers to which each patch name list is
assigned.
Each bank can also be assigned a special Drum ßag, which indicates that
all patches in that bank contain drum sounds. If you set this ßag, the
Piano Roll view will display drum notes as diamonds, and the Staff view
will use percussion notation.
To See the Assignment of Patch Name Lists to Banks…
1. Expand the instrument definition by clicking the + sign next to
the instrument name.
2. Expand the Patch Names for Banks folder by clicking the + sign.
The list expands to show the bank numbers and the patch name
list that is assigned to each bank.
To Add a Bank or Change the Patch Names for a Bank…
1. Drag a patch name list from the Names tree to the Patch Names
for Banks folder.
2. Enter a bank number, or enter –1 to indicate that this list of patch
names should be used as the default.
3. Pro Audio displays the updated banks and patch name lists. If
necessary, Pro Audio adds a new bank to the instrument
definition.
To Remove a Bank or Patch Name List…
1. Highlight the bank and patch names list in the Instrument tree.
2. Press the Del key, or right-click on the bank name and choose
Delete
from the menu.
Instrument name
There are three
defined banks
The * indicates that this
patch list is the default
This is the name of a
patch name list
To Next Page
Loading...