11-33
StudioWare
Some examples of operator usage are:
!= inequality
< less than
<= less than or equal to
> greater than
>= greater than or equal to
Formula... Example...
x = y Alias x is assigned the value of alias y whenever the value
of alias y changes
x = y + 2 * z Alias x is assigned the value of alias y plus 2 times the
value of alias z whenever either y or z changes
x = (y + 2) * z Alias x is assigned the value of alias y plus 2, then
multiplied by the value of alias z whenever either y or z
changes
x = y | z Alias x is assigned the value of alias y bitwise OR the
value of alias z whenever either y or z changes. If
y==0xF0 and z==0x07, then x is set to 0xF7
x >= y ? x : y If x is greater than or equal to y, use x; otherwise, use y
x == y ? 1 : $F0 If x is equal to y, use 1; otherwise, use $F0 (hexadecimal),
or 240 (decimal)
LUCK ? 7 : 11 If the value of alias LUCK is YES or non-zero, use 7;
otherwise, use 11
A ? x : (B ? y : z) If A then use x, else if B then use y, else use z
To Next Page
Loading...