14-12
This gives the device extra time to process each System Exclusive
message.
Roland Equipment
Some Roland equipmentÑnotably, the GR-1 and GR-50 Guitar
SynthesizersÑhave problems receiving Sysx packets in fast succession.
You must use the setting SysxDelayAfterF7 = 1 with these devices.
Ensoniq Instruments
Successfully sending Sysx messages to most Ensoniq instruments
requires that you add the following three lines to the [Options] section of
ttsseq.ini:
SysxDelayAfterF7=1 Enables delay
SysxSendDelayMsecs=200 Sets delay time to 200 milliseconds
SysxSendPacketSize=65535 Increases packet size to 65k
To Next Page