B-10
To Create a Key Binding Using a MIDI Keyboard…
1. Choose
Options-Key Bindings
to display the Key Bindings dialog
box.
2. Check MIDI in the Type of Keys list.
3. Check the Enable box to make sure MIDI key bindings are
enabled.
4. If you haven’t already done so, assign a Shift key by doing one of
the following:
• Check Key in the MIDI Shift Option list, and enter the name
of the key you want to use
• Check Controller in the MIDI Shift Option list, and choose the
controller you want from the list
5. Highlight the key you want to bind from the Key list.
6. Highlight the command you want to assign from the Function list.
7. Click Bind to bind the key to the command.
8. Click OK when you are done.
Pro Audio puts an asterisk (*) next to the key to show that it is bound
to a function and draws a black line connecting the key and function
name. From now on, pressing the chosen key combination executes
the command you have chosen.
To Enable or Disable MIDI Key Bindings…
1. Choose
Options-Key Bindings
to display the Key Bindings dialog
box.
2. To enable MIDI Key bindings, check the Enabled box. To disable
MIDI key bindings, make sure the box is not checked.
3. Click OK when you are done.
To Clear a Single Key Binding…
1. Choose
Options-Key Bindings
to display the Key Bindings dialog
box.
2. Choose the key whose binding you want to clear.
3. Click Unbind.
4. Click OK when you are done.
To Next Page
Loading...