3-3
Playback
Here are some examples of times expressed in this format (assuming
that zero is the start time):
Pro Audio provides many ways to set the Now time. Here are just a few:
When entering a time in MBT format, the beat and tick values are
optional. You can use a colon, space, or vertical bar to separate the parts
of the Now time:
Time... What it means...
00:00:00:00 The beginning of the project
00:05:10:00 Five minutes and ten seconds from the
beginning of the project
01:30:00:00 One hour and thirty minutes into the
project
00:00:00:05 Five frames into the project
To Change the Now Time…
• Click the desired time on the time ruler in the Track, Piano Roll,
Staff, or Audio view
• Click on the Now time in the large Transport toolbar, enter the
desired time, and press Enter
• Choose
Go-Time
or press F5, enter the desired time, and click OK
• Click on an event in the Event List view
You enter… The Now time is set to…
2 2:00:000
2|1 2:01:000
4 2 0 4:02:000
9:1 9:01:000
5|1:30 5:01:030
To Next Page
Loading...