Canon DC20 - Recording Additional Movies on a Finalized Disc

Recording Additional Movies on a
Finalized Disc
Recording additional scenes on a disc already finalized can be done only with DVD~RW ~
discs. A finalized DVD-RW in VIDEO mode can be unfinalized to allow recording
additional scenes and other limited editing options. With a DVD-RW recorded
in VR mode
you can record additional scenes without the need to unfinalize
it. DVD-R discs cannot be
unfinalized.
This option is only available with DVD-RW discs in VIDEO mode.
•
o When unfinalizing a disc, always power the camcorder directly from a power
outlet. The unfinalization process cannot be started ifthe camcorder is powered
only with the battery pack.
o Do not disconnect the power adapter while the disc unfinalization is in progress.
Doing so can interrupt the process and result in a disc that cannot be
recognized.
o Only discs that were finalized using this camcorder can be unfinalized with this
camcorder.
-
I~I UNFINALIZE
~ DISC OPERATIONS
MENU
(0]79)
1. Set the camcorder either to record or play movies or to record or view
still images on the disc
«(CAMERA·-ftJ, (PLAy·-ft J, (CAMERA· 0] I~ or
(PLAY· OJ I~).
2. Press the MENU button.
3. Use the omni selector (Ji..T, 8) to select the [DISC OPERATIONS]
menu and then select the [UNFINALlZE] option.
4. Select [YES] and press
(8) to start the disc unfinalization.
• Select [NO] and press (8) to cancel the operation and return to the menu.
• Avoid moving the camcorder while the disc unfinalization is
in progress.
5. Press the MENU button to close the menu.
101