I
Before
Downloading
Still Images
o Be sure to install the Digital Video Software before you connect the
camcorder to the computer.
o Make sure the camcorder is being powered using the power adapter before
connecting it to a computer.
o Connect the USB cable directly to one
of
the computer's main USB ports.
The interface may not function correctly ifthe camcorder is connected via a
USB hub.
o The connection may not operate correctly if you are using other USB
devices, excluding USB mice or keyboards, at the same time. If this occurs,
disconnect the other devices from the computer and try reconnecting the
camcorder.
o
Do
not connect two or more camcorders to the computer. The camcorders
may not operate normally.
o Never
allow
the
computer
to
go
into
standby
(sleep)
mode
while a
camcorder
is
connected via the USB interface.
o Refer to your computer manual for the location
of
the computer's USB ports.
o See your camcorder instruction manual for how to connect the camcorder to
the computer and how to change the media setting (MEDIA
SEL.O)
in
the
SYSTEM SETUP menu.
1
Insert
a
disc
or
a
memory
card
containing
images
into
the
camcorder.
2
Connect
the
power
adapter
to
the
camcorder.
3 Turn the
power
switch
to
PLAY and
move
the
-"
/0
switch
toO.
Wait until the camcorder's access indicator stops flashing.
4 To
download
still
images on the disc,
select
[DISC] in
the
SYSTEM SETUP menu.
To
download
still
images on the card,
select
[CARD]
in
the
SYSTEM SETUP menu.
5 Attach
the
supplied
USB cable
to
the
computer's
USB
port
and the
camcorder's
USB Terminal.
• The
first
time
you
connect
the
camcorder
to
the
computer:
- Installation
of
the DV TWAIN Driver (Windows 98/Windows 2000) or the DV
WIA Driver (Windows Me) starts.
- If the "Digital signature not found" message appears, click [Yes].
- If you are prompted to restart the computer, restart the computer.
To Next Page
Loading...
