IDownloading Still Images (ImageBrowser)
Below
explains
the
procedure
for
connecting
a
camcorder
to
a
computer
using
the USB cable.
For
connecting
a card reader/writer, see Using a Card Reader!
Writer
(OJ
39).
o
Proper
operation
when
connecting to a
computer
or
printer
cannot
be
guaranteed
if
the
disc
inserted into
the
camcorder
was
recorded
or
used
in a
non-Canon
digital
device. .
o
If
a
memory
card contains an
enormous
volume
of
images
(approx.
1000
or
more), you
may
not
be able to
download
images
with
ImageBrowser
or
an OS standard
software
depending
on
the
computer
you
are
using
or
the installed OS.
When
using a
memory
card, please
use a card
reader
to
download
the
still images;
for
the
disc, please use
your
computer's
DVD drive. When using the
DVD
drive
to
download
the
images
recorded
on
the
disc, it is
necessary
to insert a finalized disc.
- You cannot record any new images on the finalized DVD-R disc or
unfinalize it.
o Observe the following precautions when the camcorder's access indicator is
flashing. Failure to do so may cause disc
or
memory card data to become
corrupted.
- Do not open the disc
or
memory card cover, remove the disc or memory
card
or
detach the USB cable.
- Do not turn off the camcorder
or
the computer.
- Do not change the position
of
the power switch
or
the
)IJI!I
/0
switch.
o Images recorded onto the disc, memory card or downloaded to the hard disk
are important original data files. Create a copy
of
the file first before working
on it on your computer.
You can
select
a
downloading
method
in the
Camera
Control
window
.
• Auto-downloading
1 Connect the camcorder to the computer
(OJ
31).
To
start the Camera Control window manually, double-click the [Canon
CameraWindow] icon located on the desktop. If the [Canon CameraWindow]
icon is not on the desktop, double click the [Canon Utilities] folder on the drive
where the program was installed, followed by the [CameraWindow] folder and
the [CameraWindow] icon.
To Next Page
Loading...
