Canon DC20 - P Using the Program AE Mode

48
P Using the Program AE Mode
The camco~der automatic;iliadjUsts the aperture
4
and shQutter speed according to the
subject to achieve the best exposure conditions.
In Program AE mode, you can point and
shoot as in Auto mode, while still enjoying the option to manually adjust some settings.
1. Set the camcorder to a recording mode
([CAMERA-·") or (CAMERA' 0 ) and move the mode
switch to
p.
2. From the FUNC. menu, select the P (PROGRAM AE) '--- ------'
mode (CO 47).
If the optimal exposure cannot be obtained, try the following actions.
o Manually adjust the exposure (Q] 51).
o Change the metering method (Q] 62).
o (DID Use the flash (Q] 56).
o (DID Use the mini video light (Q] 55).