Recording
to
a
VCR
You
can copy your recordings by connecting the camcorder to a VCR or a digital video
device. For a connection diagram showing how to connect the camcorder to a VCR see
IEl
the previous section Playing Back on a TV Screen
(CO
102).
L..=.J
1.
Set the camcorder to play
m~vies
( (PLAY'·") ) and load a recorded
disc.
2.
Connected device: Load a blank cassette and set the device to record
pause mode.
3.
This camcorder: Locate the scene you wish to copy and pause
playback shortly before the scene.
4. This camcorder: Resume the movie playback.
5.
Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying
is
complete.
6.
This camcorder: Stop playback.
•
0
We recommend powering the camcorder from a household power outlet.
~~
......
0 The quality
of
the edited tape will be lower than that
of
the original.
o By default, the on-screen displays will be embedded
in
the output video signal,
but you can select to turn off the screen displays or select the data that will be
displayed instead
(CO
45).
-
103
To Next Page
Loading...
