86
Dividing
a
Scene
mJQ@§$ 0
.$
You
can divide your recordings in order to leave only the best parts and later cut out the
rest. Remember that when you divide scenes in the playlist, you do not affect your original
recordings allowing you to easily try out different "director cuts".
Available only with DVD-RW discs recorded
in
VR mode.
1.
Set the
camcorder
to
play
movies
(
[PLAY'
-"
) ).
2.
From the index screen, select (•
.."
.........
)
the
scene you
want
to
divide
and press the FUNC. button.
3.
Select (
.........
) the
-i
(DIVIDE)
icon
and press
(@l
).
• The scene will be played back.
•
You
can also press the FUNC. button while playing back a scene.
4.
At
the place where you
want
to
divide
the
scene, press the
"'/11
button
to pause the playback.
5.
If
necessary, in
order
to
bring the scene
to
a precise
point
select (
.........
)
the
...
11
III
IJl-
icon
and press
(8)
to
respectively, reverse
or
advance one
frame
at
a time.
If you want to select a different scene, select the
1401III
I~~
icon and press
(8)
to skip
to the next or previous scene. Press the
~
III
button to resume normal playback and
return to step 4 above.
6.
Select (
.........
) the
~
icon
and press
(@l
).
7.
Select [YES] and press
(§
)to
divide
the·scene.
The second part
of
the scene (starting from the dividing point) will be added as a
separate scene immediately after the original one.
To
Divide a Scene
only
in the Playlist
After Step 1 above, press the PLAYLIST button to open the playlist index screen and
continue the procedure as described.
o Photomovie scenes and scenes created by converting single still images
cannot be divided.
o Scenes shorter than 5 seconds cannot be divided.
To Next Page
Loading...
