Transferring
Still
Images
to
a
Computer
(Direct
Transfer)
With the supplied USB cable and Digital Video Software, you can transfer still images to a
computer by simply pressing the
&!J
¢'VI
(print/share) button.
The first time you connect the camcorder to the computer, you need to install the software
and set the autO-launch setting. From the second time on, you will only need to connect
the camcorder to the computer to transfer images.
1. Install
the
supplied
Digital Video Software.
See Installing the Software
in
the Digital Video Software instruction manual.
2.
Set the
camcorder
to
view
still
images «(PLAY-O]
).
3.
Connect
the
camcorder
to
the
computer
using
the
USB cable.
See Connecting the Camcorder to a Computer
in
the Digital Video Software
instruction manual.
4.
Set the
auto-launch
setting
.
• See Starling CameraWindow
in
the Digital Video Software instruction manual.
• The direct transfer menu appears on the camcorder screen and the
~
¢'VI
button
lights up.
-
o Correct performance cannot be guaranteed for discs recorded on another
digital device and inserted
in
this camcorder.
o
Do
not disconnect the USB cable, remove the disc
ormemory
card, change the
position
of
the
-"
10
switch or turn
off
the camcorder
or
the computer while
data is being transferred to the computer (while the camcorder's card
or
disc
access indicator is flashing). Doing so may result in data loss.
o
Do
not connect the camcorder to a computer with the USB cable during the
following operations:
- Deleting all scenes
- Protecting the disc
- Setting the disc title
- Initializing the disc
- Finalizing
or
Unfinalizing the disc
- Erasing all still images from the disc or
card
- Copying still images between the disc
and card
- Erasing all transfer orders
- Erasing all print orders
o Operation may not work correctly depending on the software and the
specifications/settings
of
your computer.
o The image files on your disc or memory card and the image files saved on the
hard disc drive
of
your computer are valuable, original data files. If you wish to
use image files on your computer, make copies
of
them first, and use the copied
file, retaining the original.
o We recommend powering the camcorder from a household power outlet while it
is connected to the computer.
o Refer also to the computer's instruction manual.
109
To Next Page
Loading...
Need help?
General
