Message
Explanation
CO
DISC ERROR Disc could not
be
read.
Try
cleaning it
or
replace the disc.
133
This message can also appear
if
the camcorder
has
exceeded its -
operational temperature. Disconnect the
power
adapter and
remove the battery and let the camcorder cool down before
resuming use.
This message can also appear
if
condensation
has
formed. Wait 127
until the camcorder dries completely before resuming use.
ACCESS
ERROR There was a disc error when reading the
disc
or
attempting to
133
write onto it. Try cleaning the disc
or
replace it.
This message can also appear
if
condensation has formed. Wait
127
until the camcorder dries completely before resuming use.
DISC COVER IS OPEN
Verify the
disc
is correctly inserted and close the
disc
cover.
31
NO
DISC
No disc is loaded. Insert a disc.
31
You
inserted a disc recorded in a different Television System (PAL
-
orSECAM).
This message can also appear
if
condensation has formed. Wait 127
until the camcorder dries completely before resuming use.
UNABLE TO
RECOVER
Could not recover a corrupted file. Initialize the disc.
91
DATA
This message can also
appear
if
condensation has formed. If you
127
suspect condensation is the reason,
do
not initialize the disc and
wait until the camcorder dries completely before resuming use.
UNABLE
TO
RECOVER
Could not recover a corrupted file. Initialize the disc.
91
DATA INITIALIZE THE
This message can also appear
if
condensation has formed.
If
you
127
DISC
suspect condensation is the reason,
do
not initialize the disc and
wait until the camcorder dries completely before resuming use.
LOADING
THE
DISC
The
disc is being read. Wait before you start recording.
-
OPENING THE DISC
Do not force the disc cover open before it opens automatically. If a
31
COVER
disc is already loaded, this
may
take a moment.
Message
Explanation
CO
NO CARD
Memory card not is inserted into the camcorder.
30
NO IMAGES No images are recorded on the
memory
card.
-
CARD ERROR A memory card
error
occurred.
The
camcorder cannot record
or
-
display the image.
The error
may
be temporary.
If
the message disappears after 4
seconds and
"01" flashes red, turn the camcorder off, remove the
card and reinsert the card.
If"
(]
" changes to green, you can
continue recording/playback.
CARD FULL Memory card is full. Erase some images
to
free some space
or
94
replace the memory card.
NAMING
ERROR
The folder and file numbers have reached their maximum value.
-
UNIDENTIFIABLE The image file is corrupted
or
it
was
saved using a compression
-
IMAGE method other than that compatible with this camcorder (JPEG).
~
TRANSFER
ORDER
You
attempted to set more than 998 transfer orders. 112
ERROR
TOO MANY
STILL
Disconnect the USB cable and decrease the number
of
still
-
IMAGES
DISCONNECT
images on the
memory
card
or
disc
to
less than 1800. Images
USB
CABLE cannot be erased from a DVD-R
or
DVD-RW
disc
recorded in
VIDEO mode. If a dialog appeared on the computer screen, close
it. Reconnect the USB cable.
-
129
To Next Page
Loading...
