36
o When the subject is too bright, "OVEREXP." starts flashing. In such case, use
the optional FS-H27U ND filter.
o
In
order to save power when the camcorder is powered by a battery pack, the
camcorder will automatically shut off if left without any operations for 5 minutes
(CD
84).
"&
AUTO POWER OFF" appears 30 seconds before shutoff.
To
continue recording, turn the power switch
to
OFF and then back to CAMERA.
S~I~,timlJb,e,,Me;diajQl~1b~,,S~UI"lttlaQces~fr;~&'ir","#;~='3;&'?~_;~;"';,w"SS<;",Ki,i4
You
can record still images on the memory card or the disc.
Tile
default media for still
images is the memory card.
1.
Set
the
camcorder
to
record
or
view
still
images ((CAMERA-OJ
or
[PLAY-OJ ).
2.
Press the MENU
button.
Using the
omni
selector
C"
....
)select the
[SYSTEM SETUP] menu and press
(8
).
3.
Select ( )
the
[MEDIA SEL.
0]
option
and
press
(8).
4.
Change ( ) the setting
to
[DISC]
or
[CARD] and press
(8)
to
save
the selection and close the menu.
When recording, the operating mode symbol will change to
~
(DISC STILLS) or
~
(CARD STILLS), depending on the media selected. In playback mode, the operating
mode symbol will change to
~
(DISC STILLS) or
~
(CARD STILLS), respectively.
To Next Page
Loading...
