14.Lightning - For added protection of this
product during a lightning storm, or when it
is left unattended and unused for long
periods of time, disconnect it from the wall
outlet and disconnect the antenna. This
will prevent damage to the product due to
lightning and power-line surges.
1S.0verloading -
Do
not overload wall
outlets and extension cords as this can
result
in
a risk
of
fire or electric shock.
16.
Objects and Liquid Entry - Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short out parts
that could result
in
a fire or electric shock.
Be
careful not to spill liquid
of
any kind
onto the product.
17.Servicing -
Do
not attempt to service this
product yourself as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer
all
servicing to qualified service personnel.
18.Damage Requiring Service - Disconnect
this product from the wall outlet and all
power sources including battery, and refer
servicing to qualified service personnel
under the following conditions:
a.
When the power-supply cord or plug is
damaged.
b.
If any liquid has been spilled onto, or
objects have fallen into, the product.
c.
Ifthe product has been exposed to rain
or water.
d.
If the product does not operate
normally even if you follow the
operating instructions. Adjust only
those controls that are covered by the
operation instructions. Improper
adjustment
of
other controls may result
in
damage and will often require
extensive work by a qualified technician
to restore the product to its normal
operation.
e.
If
the product has been dropped
or
the
cabinet has been damaged.
f.
When the product exhibits a distinct
change
in
performance. This indicates
a need for service.
19.Replacement Parts - When replacement
parts are required, be sure the service
technician has used replacement parts
that are specified by Canon or that have
the same characteristics as the original
part. Unauthorized substitutions may result
in
fire, electric shock or other hazards.
20.Safety Check - Upon completion of any
service or repairs to this product, ask the
service technician to perform safety
checks to determine that the product is
in
safe operating order.
ANTENNA
LEAD IN
WIRE
ANTENNA DISCHARGE
UNIT (NEC SECTION 810·20)
GROUNDING
CONDUCTORS
(NEC SECTION 810·21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE
---
NEC • NATIONAL
ELECTRICAL CODE
Fig. 1
Should you need
to
replace the
compact
power
adapter,
please
return it
to
the
responsible nearest
Canon
Service
Center
and
please replace it with
the
same
type
number
CA-570.
The
Adapter
can be used with a
power
supply
between
100
and
240
V AC.
For
areas
where
120 V
AC
power
is
not
used, you will need a special plug adapter.
Contact
your
nearest
Canon
Service
Center
for
further information.
Use
only
CSA/UL
Certified
power
supply cord set, Polarized,
Type
SPT-2
or
heavier,
minimum No.
18
AWG copper, rated 125
or
250
V,
minimum
,P A,
minimum
6
ft
(1.8 m),
maximum
10
ft
(3
m)
long.
IThis Class B digital apparatus complies with
Canadian
ICES-003.
4
To Next Page
Loading...
