4-41
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Security Configuration Menu
Table 4-26 802.1X Authentication Real-Time Status
Option Description To Change
802.1X Authentication
Status
Real-time progress of the 802.1X authentication status,
displaying one of the following states:
• Disabled—802.1X is disabled and transaction was not
attempted
• Disconnected—Physical link is down or disconnected
• Connecting—Trying to discover or acquire the
authenticator
• Acquired—Authenticator acquired, awaiting
authentication to begin
• Authenticating—Authentication in progress
• Authenticated—Authentication successful or implicit
authentication due to timeouts
• Held—Authentication failed, waiting before next attempt
(approximately 60 seconds)
Display only—Cannot configure.
To Next Page
Loading...
