Cisco 7931G Administration Guide

4-26
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Media Configuration Menu
The Media Configuration menu displays whether the headset, speakerphone, and video capability are
enabled on the phone. This menu also displays options for recording tones that the phone may play to
indicate that a call may be recorded. Table 4-15 describes the options on this menu.
Wideband
Headset UI
Control
Indicates if the user can configure the Wideband Headset
option in the phone user interface.
Va l ues :
• Enabled—The user can configure the Wideband Headset
option in the Audio Preferences menu on the phone (from
the Settings menu, choose User Preferences > Audio
Preferences> Wideband Headset).
• Disabled—The value of the Wideband Headset option in
Cisco Unified Communications Manager Administration
gets used (see the “Media Configuration Menu” section on
page 4-26).
Default: Enabled
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Personalization Indicates if the phone has been enabled for configuring custom
ring tones and wallpaper images.
Default: Enabled
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Enbloc Dialing
(SCCP only)
Indicates if the phone will use Enbloc dialing:
• If Enabled, the phone will use Enbloc dialing
when possible.
• If Disabled, the phone will not use Enbloc dialing.
You should disable Enbloc dialing if either Forced
Authorization Code (FAC) or Client Matter Code (CMC)
dialing is being used.
Default: Enabled
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
Table 4-14 UI Configuration Menu Options (continued)
Option Description To Change
Table 4-15 Media Configuration Menu Options
Option Description To Change
Speaker
Enabled
Indicates if the speakerphone is enabled on the phone. From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Headset
Enabled
Indicates if the Headset button is enabled on
the phone.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Video
Capability
Enabled
Indicates if the phone can participate in video
calls when connected to an appropriately equipped
computer.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.

Cisco 7931G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Electromagnetic compatibility	FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-Fi	No
Networking standards	IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	DHCP, TFTP, CDP
Lines quantity	24 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Voice codecs	G.711a, G.729A, G.729B, G.729ab
Volume control	Digital
Display resolution	192 x 64 pixels
Display number of lines	3 lines
Display number of colors	Monochrome
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	229 mm
Width	203 mm
Height	178 mm
Weight	1360 g