Cisco 7931G - Add Service to Programmable Feature Button; User Settings; Change Browser Password

4-22
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Call Preferences Menu (SIP Phones Only)
The Call Preferences menu displays settings that relate to the settings for the call preferences on a SIP
phone. Table 4-10 describes the options in this menu.
Related Topics
• Displaying a Configuration Menu, page 4-2
• Device Configuration Menu, page 4-17
Table 4-10 Call Preferences Menu Options
Option Description To Change
Caller ID Blocking Indicates whether caller ID blocking is enabled (Yes)
or disabled (No) for the phone.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Anonymous Call
Block
Indicates whether anonymous call block is enabled
(Yes) or disabled (No) for the phone.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Call Waiting
Preferences
Displays a sub-menu that indicates whether call
waiting is enabled (Yes) or disabled (No) for each line.
From Cisco Unified Communications Manager
Administration, choose Call Routing >
Directory Number.
Call Hold Ringback Indicates whether the call hold ringback feature is
enabled (Yes) or disabled (No) for the phone.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Stutter Msg
Waiting
Indicates whether stutter message waiting is enabled
(Yes) or disabled (No) for the phone.
From Cisco Unified Communications Manager
Administration, choose Device >
Device Settings > SIP Profile.
Call Logs BLF
Enabled
Indicates whether BLF for call logs is enabled (Yes) or
disabled (No) for the phone.
Use Cisco Unified Communications Manager
Administration.
Auto Answer
Preferences
Displays a sub-menu that indicates whether auto
answer is enabled (Yes) or disabled (No) for the each
line.
From Cisco Unified Communications Manager
Administration, choose Call Routing >
Directory Number.
Speed Dials Displays a sub-menu that displays the lines available
on the phone. Select a line to see the speed dial label
and number assigned to that line.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Add
a New Speed Dial or Device > Phone >
Add/Update Speed Dials.