Cisco 7931G Administration Guide

xii
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Preface
Related Documentation
For more information about Cisco Unified IP Phones or Cisco Unified CM, see these publications:
Cisco Unified IP Phone
The following publications are available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
• Cisco Unified IP Phone 7931G Phone Guide
• Cisco Unified IP Phone Features A–Z
• Installing the Universal Wall Mount Kit for the Cisco Unified IP Phone
• Regulatory Compliance and Safety Information for Cisco Unified IP Phones
• Open Source License Notices for the Cisco Unified IP Phones 7900 Series
Chapter 5, “Configuring Features,
Templates, Services, and Users”
Overview of configuring telephony features, directories,
and phone button and softkey templates and how to set up
services and add users to Cisco Unified CM
Chapter 6, “Customizing the Cisco
Unified IP Phone”
How to customize phone ring sounds and the phone idle
display at your site
Chapter 7, “Viewing Model Information,
Status, and Statistics on the Cisco Unified
IP Phone”
How to view model information, status messages, network
statistics, and firmware information from the Cisco Unified
IP Phone
Chapter 8, “Monitoring the Cisco
Unified IP Phone Remotely”
Information that you can obtain from a phone’s web page,
which you can use to remotely monitor the phone’s
operation and to assist with troubleshooting
Chapter 9, “Troubleshooting and
Maintenance”
Tips for troubleshooting the Cisco Unified IP Phone
Appendix A, “Supporting International
Users”
Information about setting up phones in a non-English
environments
Appendix B, “Feature Support by
Protocol for the Cisco Unified IP Phone
7931G”
Information about feature support for the Cisco Unified
IP Phone using the SCCP or SIP protocol with Cisco
Unified CM
Appendix C, “Providing Information to
Users Via a Website”
Suggestions for setting up a website for providing users
with important information about their Cisco Unified
IP Phones
Appendix D, “Technical Specifications” Technical specifications of the Cisco Unified IP Phone
Appendix E, “Basic Phone
Administration Steps”
Procedures for basic administration tasks such as adding a
user and phone to Cisco Unified CM and then associating
the user to the phone

Cisco 7931G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Electromagnetic compatibility	FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-Fi	No
Networking standards	IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	DHCP, TFTP, CDP
Lines quantity	24 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Voice codecs	G.711a, G.729A, G.729B, G.729ab
Volume control	Digital
Display resolution	192 x 64 pixels
Display number of lines	3 lines
Display number of colors	Monochrome
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	229 mm
Width	203 mm
Height	178 mm
Weight	1360 g