B-1
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
APPENDIX
B
Feature Support by Protocol for the Cisco Unified
IP Phone 7931G
This appendix provides information about feature support for the Cisco Unified IP Phone using the
SCCP or SIP protocol with Cisco Unified Communications Manager 8.0.
Table B-1 provides a high-level overview of calling features and their support by protocol. The table
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user-interface differences and feature use, refer to the
Cisco Unified IP Phone user guide.
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
Table B-1 Cisco Unified IP Phone Feature Support by Protocol
Features
Cisco Unified IP Phone
For More InformationSCCP SIP
Calling Features
Abbreviated Dialing Supported Supported “Basic Call Handling—Placing a Call: Additional
Options”
Audible Message Waiting
Indicator
Supported Supported “Accessing Voice Messages”
Auto Answer Supported Supported “Using a Handset, Headset, and
Speakerphone—Using Auto Answer”
Auto Dial Supported Supported “Basic Call Handling—Placing a Call: Basic
Options”
Barge (and cBarge) Supported Supported “Advanced Call Handling—Using a Shared Line”
Busy Lamp Field (BLF) Supported Supported “Advanced Call Handling—Using BLF to Determine
a Line State”
Busy Lamp Field (BLF)
Pickup
Supported Supported “Advanced Call Handling—Using BLF to Determine
a Line State”
Call Back Supported Supported “Basic Call Handling—Placing a Call: Additional
Options”
Call Chaperone Supported Supported
Call Display Restrictions Supported Supported