Cisco 7931G - Change Audible Voice Message Indicator Setting Per Line; Edit Line Text Label for Phone Display; Phone and Access List Set Up for Mobile Connect

4-25
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
UI Configuration Menu
The UI Configuration menu displays the status of various user interface features on the phone.
Table 4-14 describes the options on this menu.
Table 4-14 UI Configuration Menu Options
Option Description To Change
Auto Line Select Indicates if the phone shifts the call focus to incoming calls on
all lines.
When this option is disabled, the focus remains on the line
that is currently in use. When this option is enabled, the phone
shifts the call focus to the line with the most recent
incoming call.
Default: Disabled
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
BLF for Call
Lists
Indicates if the Busy Lamp Field (BLF) is enabled for call lists. From Cisco Unified Communications
Manager Administration, choose System
> Enterprise Parameters.
Reverting Focus
Priority
Indicates if the phone shifts the call focus on the phone screen
to an incoming call or a reverting hold call. Settings include:
Lower—Focus priority given to incoming calls.
Higher—Focus priority given to reverting calls.
Even—Focus priority given to the first call.
From Cisco Unified Communications
Manager Administration, choose System
> Device Pool.
Auto Call Select Indicates if the phone automatically shifts the call focus to
an incoming call on the same line when the user is already on
a call.
When this option is enabled, the phone shifts the call focus to
the most recent incoming call.
When this option is disabled, all automatic focus changes,
including Auto Line Select, are disabled regardless of
their setting.
Default: Enabled
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
“more” Softkey
Timer
Indicates the number of seconds that additional softkeys are
displayed after the user presses more. If this timer expires
before the user presses another softkey, the display reverts to
the initial softkeys.
Range: 5 to 30; 0 represents an infinite timer.
Default: 5
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.