Cisco 7931G Administration Guide

4-24
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Locale Configuration Menu
The Locale Configuration menu displays information about the user locale and the network locale used
by the phone. Table 4-12 describes the options on this menu.
NTP Configuration Menu (SIP Phones Only)
The NTP Configuration menu displays information about the NTP server and mode configuration used
by SIP phones. Table 4-13 describes the options on this menu.
Table 4-12 Locale Configuration Menu Options
Option Description To Change
User Locale User locale associated with the phone user. The user locale
identifies a set of detailed information to support users,
including language, font, date and time formatting, and
alphanumeric keyboard text information.
For more information on installing user locale, see the
Cisco Unified Communications Operating System
Administration Guide.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
User Locale
Version
Version of the user locale loaded on the phone. Display only—Cannot configure.
User Locale
Char Set
Character set that the phone uses for the user locale. Display only—Cannot configure.
Network Locale Network locale associated with the phone user. The network
locale identifies a set of detailed information that supports the
phone in a specific location, including definitions of the tones
and cadences used by the phone.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Network Locale
Version
Version of the network locale loaded on the phone. Display only—Cannot configure.
NTP
Configuration
(SIP phones
only)
Provides access to the NTP Configuration Menu. For more
information, see NTP Configuration Menu (SIP Phones Only),
page 4-24.
From Cisco Unified Communications
Manager Administration, choose System
> Phone NTP Reference.
Table 4-13 NTP Configuration Menu Options
Option Description To Change
NTP IP
Address 1
IP address of the primary NTP server. From Cisco Unified Communications Manager
Administration, choose System > Phone NTP Reference.
NTP IP
Address 2
IP address of the secondary or backup NTP
server.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP Reference.
NTP Mode 1 Primary server mode. Supported modes are
Directed Broadcast and Unicast.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP Reference.
NTP Mode 2 Secondary server mode. Supported modes are
Directed Broadcast and Unicast.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP Reference.

Cisco 7931G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Electromagnetic compatibility	FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-Fi	No
Networking standards	IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	DHCP, TFTP, CDP
Lines quantity	24 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Voice codecs	G.711a, G.729A, G.729B, G.729ab
Volume control	Digital
Display resolution	192 x 64 pixels
Display number of lines	3 lines
Display number of colors	Monochrome
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	229 mm
Width	203 mm
Height	178 mm
Weight	1360 g