C-3
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Appendix C Providing Information to Users Via a Website
How Users Subscribe to Services and Configure Phone Features
Administrators can either download customizable versions of the eLearning tutorials (English only)
from the phone product pages on cisco.com at
http://cisco.com/en/US/products/hw/phones/ps379/ps1855/index.html
Refer to the tutorial Read Me file included with the relevant eLearning tutorial for specific instructions,
including how to link to the most recent user guide PDF.
How Users Subscribe to Services and Configure Phone Features
End users can perform various activities using the Cisco Unified CM User Options web pages such as
subscribing to services, setting up speed-dial and call-forwarding numbers, configuring ring settings,
and creating a personal address book (PAB). Because configuring phone settings using a website may
be new for your end users, it is helpful to provide as much information as possible so they can access
and use the Cisco Unified CM User Options web pages successfully.
Make sure to provide end users with the following information about the Cisco Unified CM User Options
web pages:
• The URL required to access the application:
https://servername:portnumber/ccmuser, where server_name is the host on which the web server
is installed.
• A user ID, default password are needed to access the application.
These settings correspond to the values you entered when you added the user to
Cisco Unified Communications Manager. (See Adding Users to Cisco Unified Communications
Manager, page 5-21.)
• A brief description of what a web-based, graphical user interface application is, and how to access
it with a web browser.
• An overview the tasks that users can accomplish using the web page.
You can also refer users to Cisco Unified IP Phone 7931G Guide, which is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
How Users Access a Voice Messaging System
Cisco Unified Communications Manager lets you integrate with many different voice mail messaging
systems, including the Cisco Unity voice messaging system. Because you can integrate with a variety of
systems, you must provide users with information about how to use your specific system.
You should provide this information to each user:
• How to access the voice mail messaging system account.
Make sure that you have used Cisco Unified Communications Manager to configure the Messages
button on the Cisco Unified IP Phone.
• Initial password for accessing the voice messaging system.
Make sure that you have configured a default voice messaging system password for all users.
• How the phone indicates that voice messages are waiting.
Make sure that you have used Cisco Unified Communications Manager to set up a message waiting
indicator (MWI) method.
To Next Page
Loading...
