A-2
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Appendix A Supporting International Users
Support for International Call Logging
Support for International Call Logging
If your phone system is configured for international call logging, the call logs, redial, or call directory
entries may display a “+” symbol to represent the international escape code for your location. Depending
on the configuration for your phone system, the “+” may be replaced with the correct international
dialing code, or you may need to edit the number before dialing to manually replace the “+” with the
international escape code for your location.
In addition, while the call log or directory entry may display the full international number for the
received call, the phone display may show the shortened local version of the number, without
international or country codes.
To Next Page
Loading...
