Cisco 7931G - Turn On Mobile Connect from Mobile Phone; Turn Off Mobile Connect from Mobile Phone; Turn On or Off Mobile Connect Access to All Remote Destinations from Desk Phone

CHAPTER
3-1
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
3
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the Cisco Unified IP Phone 7931G on
an IP telephony network:
• Before You Begin, page 3-1
• Understanding the Cisco Unified IP Phone 7931G Components, page 3-3
• Installing the Cisco Unified IP Phone, page 3-5
• Securing the Phone with a Cable Lock, page 3-7
• Mounting the Phone to the Wall, page 3-8
• Verifying the Phone Startup Process, page 3-8
• Configuring Startup Network Settings, page 3-9
• Configuring Security on the Cisco Unified IP Phone, page 3-9
Note Before you install a Cisco Unified IP Phone, you must decide how to configure the phone in your
network. Then you can install the phone and verify its functionality. For more information, see
Chapter 2, “Preparing to Install the Cisco Unified IP Phone on Your Network.”
Before You Begin
Before installing the Cisco Unified IP Phone, review the requirements in these sections:
• Network Requirements, page 3-2
• Cisco Unified Communications Manager Configuration, page 3-2