Cisco 7931G Administration Guide

4-23
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
HTTP Configuration Menu
The HTTP Configuration menu displays the URLs of servers from which the phone obtains a variety of
information. This menu also displays information about the idle display on the phone.
Note Cisco Unified IP Phones does not support URLs with IPv6 addresses in the URL. This includes
hostname which maps to a IPv6 address for directories, services, messages, and information URLs. If
you support the phone’s usage of URLs, you must configure the phone and the servers that provide URL
services with IPv4 addresses.
Table 4-11 describes the options on the HTTP Configuration menu.
Table 4-11 HTTP Configuration Menu Options
Option Description To Change
Directories URL URL of the server from which the phone
obtains directory information.
From Cisco Unified Communications Manager Administration,
choose Device > Phone > Phone Configuration.
Services URL URL of the server from which the phone
obtains Cisco Unified IP Phone services.
From Cisco Unified Communications Manager Administration,
choose Device > Phone > Phone Configuration.
Messages URL URL of the server from which the phone
obtains message services.
From Cisco Unified Communications Manager Administration,
choose Device > Phone > Phone Configuration.
Information
URL
URL of the help text that appears on the
phone.
From Cisco Unified Communications Manager Administration,
choose Device > Phone > Phone Configuration.
Authentication
URL
URL that the phone uses to validate
requests made to the phone web server.
From Cisco Unified Communications Manager Administration,
choose Device > Phone > Phone Configuration.
Proxy Server
URL
URL of proxy server, which makes
HTTP requests to non-local host
addresses on behalf of the phone HTTP
client and provides responses from the
non-local host to the phone HTTP client.
From Cisco Unified Communications Manager Administration,
choose Device > Phone > Phone Configuration.
Idle URL URL of an XML service that the phone
displays when the phone has not been
used for the time specified in the Idle
URL Time option and no menu is open.
For example, you could use the Idle URL
option and the Idle URL Timer option to
display a stock quote or a calendar on the
phone screen when the phone has not
been used for 5 minutes.
From Cisco Unified Communications Manager Administration,
choose Device > Phone > Phone Configuration.
Idle URL Time Number of seconds that the phone has
not been used and no menu is open before
the XML service specified in the Idle
URL option is activated.
Use Cisco Unified Communications Manager Administration to
modify Device > Phone > Phone Configuration.

Cisco 7931G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Electromagnetic compatibility	FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-Fi	No
Networking standards	IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	DHCP, TFTP, CDP
Lines quantity	24 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Voice codecs	G.711a, G.729A, G.729B, G.729ab
Volume control	Digital
Display resolution	192 x 64 pixels
Display number of lines	3 lines
Display number of colors	Monochrome
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	229 mm
Width	203 mm
Height	178 mm
Weight	1360 g