Cisco 7931G Administration Guide

5-20
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 5 Configuring Features, Templates, Services, and Users
Configuring Softkey Templates
To modify a phone button template for PAB or Fast Dial, follow these steps:
Procedure
Step 1 From Cisco Unified Communications Manager Administration, choose Device > Device Settings >
Phone Button Template.
Step 2 Click Find.
Step 3 Select the phone model.
Step 4 Click Copy, enter a name for the new template, and then click Save.
The Phone Button Template Configuration window opens.
Step 5 Identify the button you would like to assign, and select Service URL from the Features drop-down list
box associated with the line.
Step 6 Click Save to create a new phone button template using the service URL.
Step 7 Choose Device > Phone and open the Phone Configuration window for the phone.
Step 8 Select the new phone button template from the Phone Button Template drop-down list box.
Step 9 Click Save to store the change and then click Apply Config to implement the change.
The phone user can now access the User Options pages and associate the service with a button on
the phone.
For additional information on IP phone services, see the Cisco Unified Communications Manager
Administration Guide, IP Phone Services Configuration. For additional information on configuring line
buttons, see the Cisco Unified Communications Manager Administration Guide, Cisco Unified IP Phone
Configuration.
Configuring Softkey Templates
Using Cisco Unified CM Administration, you can manage softkeys associated with applications that are
supported by the Cisco Unified IP Phone 7931G. Cisco Unified Communications Manager supports two
types of softkey templates: standard and nonstandard. Standard softkey templates include Standard
Manager, Standard Shared Mode Manager, and Standard Assistant. An application that supports
softkeys can have one or more standard softkey templates associated with it. You can modify a standard
softkey template by making a copy of it, giving it a new name, and making updates to that copied softkey
template. You can also modify a nonstandard softkey template.
To configure softkey templates, choose Device > Device Settings > Softkey Template from
Cisco Unified CM Administration. To assign a softkey template to a phone, use the Softkey Template
field in the Cisco Unified CM Administration Phone Configuration window. For more information, see
the Cisco Unified Communications Manager Administration Guide and Cisco Unified Communications
Manager System Guide.
Note The Cisco Unified IP Phone 7931G supports all the softkeys that are configurable in Cisco Unified CM
Administration.

Cisco 7931G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Electromagnetic compatibility	FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-Fi	No
Networking standards	IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	DHCP, TFTP, CDP
Lines quantity	24 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Voice codecs	G.711a, G.729A, G.729B, G.729ab
Volume control	Digital
Display resolution	192 x 64 pixels
Display number of lines	3 lines
Display number of colors	Monochrome
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	229 mm
Width	203 mm
Height	178 mm
Weight	1360 g