Cisco 7931G Administration Guide

5-2
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Phone
Telephony Features Available for the Phone
After you add Cisco Unified IP Phones to Cisco Unified Communications Manager, you can add
functionality to the phones. Table 5-1 includes a list of supported telephony features, many of which you
configure using Cisco Unified Communications Manager Administration. The Configuration Reference
column lists Cisco Unified Communications Manager documentation that contain configuration
procedures and related information.
For information about using most of these features on the phone, see the Cisco Unified IP Phone 7931G
Phone Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP). For a comprehensive
listing of features on the phone, see Cisco Unified IP Phone Features A–Z at this URL:
http://cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/phone_a_to_z/english/user/guide/az_
user.html
Note Cisco Unified Communications Manager Administration also provides several service parameters
that you can use to configure various telephony functions. For more information about service
parameters and the functions that they control, see the Cisco Unified Communications Manager
Administration Guide.
Table 5-1 Telephony Features for the Cisco Unified IP Phone
Feature Description Configuration Reference
Abbreviated
dialing
Allows users to speed dial a phone number by entering an
assigned index code (1 – 99) on the phone keypad.
Note You can use Abbreviated Dialing while on-hook
or off-hook.
Users assign index codes from the Cisco Unified CM web
pages.
For more information, see:
• Cisco Unified Communications Manager
Administration Guide, Cisco Unified IP
Phone Configuration
• Cisco Unified Communications Manager
System Guide, Cisco Unified IP Phones.
Add Select to
Join
Creates a conference by joining together existing calls
that are on a single phone line.
For more information, see the Cisco Unified IP
Phone Guide, “Basic Call Handling.”
Anonymous
Call Block
(SIP phones
only)
Allows a user to reject calls from anonymous callers. For more information, see the Cisco Unified
Communications Manager Administration
Guide, SIP Profile Configuration.
Any Call Pickup Allows users to pick up a redirected call via a CTI
application on any line in their call pickup group,
regardless of how the call was routed to the phone.
For more information, see the Cisco Unified
Communications Manager Administration
Guide, Call Pickup Group.
Audible
Message
Waiting
Indicator
A stutter tone from the handset, headset, or speakerphone
indicates that a user has one or more new voice messages
on a line.
Note The stutter tone is line-specific. You hear it only
when using the line with waiting messages.
For more information, see these guides:
• Cisco Unified Communications Manager
Administration Guide, Message Waiting
Configuration.
• Cisco Unified Communications Manager
System Guide, Voice Mail Connectivity to
Cisco Unified Communications Manager.

Cisco 7931G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Electromagnetic compatibility	FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-Fi	No
Networking standards	IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	DHCP, TFTP, CDP
Lines quantity	24 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Voice codecs	G.711a, G.729A, G.729B, G.729ab
Volume control	Digital
Display resolution	192 x 64 pixels
Display number of lines	3 lines
Display number of colors	Monochrome
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	229 mm
Width	203 mm
Height	178 mm
Weight	1360 g