Cisco 7931G Administration Guide

5-17
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 5 Configuring Features, Templates, Services, and Users
Configuring Corporate and Personal Directories
Configuring Corporate and Personal Directories
The Directories button on the Cisco Unified IP Phone 7931G gives users access to several directories.
By default, this button is line button 22 (the second-from-top line button on the left).
The directories can include:
• Corporate Directory—Allows a user to look up phone numbers for co-workers.
To support this feature, you must configure corporate directories. For more information, see the
“Configuring Corporate Directories” section on page 5-17.
• Personal Directory—Allows a user to store a set of personal numbers.
To support this feature, you must provide the user with software to configure the personal directory.
For more information, see the “Configuring Personal Directory” section on page 5-17.
Configuring Corporate Directories
Cisco Unified Communications Manager uses a Lightweight Directory Access Protocol (LDAP)
directory to store authentication and authorization information about users of Cisco Unified
Communications Manager applications that interface with Cisco Unified Communications Manager.
Authentication establishes a user’s right to access the system. Authorization identifies the telephony
resources that a user is permitted to use, such as a specific telephone extension.
To install and set up these features, see the Cisco Unified Communications Manager Administration
Guide, LDAP System Configuration, LDAP Directory Configuration, and LDAP Authentication
Configuration.
After the LDAP directory configuration completes, users can use the Corporate Directory service on
their Cisco Unified IP Phone to look up users in the corporate directory.
Configuring Personal Directory
Personal Directory consists of the following features:
• Personal Address Book (PAB)
• Personal Fast Dials (Fast Dials)
• Address Book Synchronization Tool (TABSynch)
Users can access Personal Directory features by these methods:
• From a web browser—Users can access the PAB and Fast Dials features from the Cisco Unified CM
web pages
• From the Cisco Unified IP Phone—Users can choose Directories > Personal Directory to access
the PAB and Fast Dials features from their phones
• From a Microsoft Windows application—Users can use the TABSynch tool to synchronize their
PABs with Microsoft Windows Address Book (WAB). Customers who want to use the Microsoft
Outlook Address Book (OAB) should begin by importing the data from the OAB into the Windows
Address Book (WAB). TabSync can then be used to synchronize the WAB with Personal Directory.
To ensure that Cisco IP Phone Address Book Synchronizer users have access to end-user data that
pertains only to them, activate the Cisco UXL Web Service in Cisco Unified Serviceability.

Cisco 7931G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Electromagnetic compatibility	FCC Part 15 (CFR 47) Class B, ICES-003 Class B, EN55022 Class B, CISPR22 Class B, AS/NZS CISPR 22 Class B, CISPR 24, VCCI Class B, EN55024, EN 50082-1, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1
Wi-Fi	No
Networking standards	IEEE 802.1Q, IEEE 802.1af, IEEE 802.1p
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	DHCP, TFTP, CDP
Lines quantity	24 lines
Phonebook capacity	- entries
Number of VoIP accounts	-
Voice codecs	G.711a, G.729A, G.729B, G.729ab
Volume control	Digital
Display resolution	192 x 64 pixels
Display number of lines	3 lines
Display number of colors	Monochrome
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Safety	(UL) 60950, (CSA) C22.2 No. 60950, EN 60950, IEC 60950, AS/NZS60950, TS 001
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	229 mm
Width	203 mm
Height	178 mm
Weight	1360 g