7-11
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-20798-01
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
Firmware Versions Screen
The Firmware Versions screen displays information about the firmware version that is running on the
phone. Table 7-4 explains the information that is displayed on this screen.
To display the Firmware Version screen, take either of these actions:
• If the phone is registered with Cisco Unified Communications Manager, press the Application Menu
button, then choose Settings > Status > Firmware Versions.
By default, the Application Menu button is line button 24 (the top left line button).
• If the phone is not registered with Cisco Unified Communications Manager, press the Settings
softkey and then choose Status > Firmware Versions.
This softkey appears only when the phone is not registered.
Port 2 Link state and connection of the Network port
IPv4 Information on the DHCP status. This includes the following states:
• CDP BOUND
• CDP INIT
• DHCP BOUND
• DHCP DISABLED
• DHCP INIT
• DHCP INVALID
• DHCP REBINDING
• DHCP REBOOT
• DHCP RENEWING
• DHCP REQUESTING
• DHCP RESYNC
• DHCP UNRECOGNIZED
• DHCP WAITING COLDBOOT TIMEOUT
• SET DHCP COLDBOOT
• SET DHCP DISABLED
• DISABLED DUPLICATE IP
• SET DHCP FAST
Table 7-3 Network Statistics Message Components (continued)
Item Description
To Next Page
Loading...
